|Place of Origin:||China|
|Model Number:||CBY SAE J1772|
|Minimum Order Quantity:||1 piece|
|Packaging Details:||Carton packing|
|Payment Terms:||Western Union, T/T, MoneyGram, L/C|
|Supply Ability:||10000 pieces per month|
|Operating voltage::||250V AC||Sealing gasket::||rubber or silicon rubber|
|Insulation resisitance::||:>1000MΩ(DC500V)||Working temperature::||-30°C ~+ 50°C|
|Color::||Orange or Black||Material::||Copper/Rubber/Cable/Thermoplastic material|
ev charger connector,
ev charging cord
Car charger with cable EVC07E2Q-H (TUV) wire ev charging cable J1772 Current select 16/32Amp EV charging connector
1. Don't submerge the ev charging box in water.
2. Don't step on, fold or knot the cable.
3. Don't drop the EV charging box or place a heavy object on it.
4. Don't place the charging cable near high temperature object when charging.
5. Don't operate the EVSE in temperatures beyond its operating range of -25°C to 55°C.
6. Power-supply side input cable should be at least 3*2.5mm (recommended 3*4mm), with a standard 16A scoket. It is suggested taht the power distribution is done by the professionals.
1. Don't put fingers into the charging connector when the power plug is still connecting to the power.
2. Don't use this ev charging box when the cable is damaged.
3. The ev charging box is only for ev charging using.
4. Don't use this device with an extension cord or adaptor.
Automatic resumption of the charging process
For normal EV Charging Box, it is switched off after an error or power failure and must be reactivated manually. Therefore, when overnight charging is planned, the battery could still be empty the following morning.
But this is not the case with the BS-PCD019. The BS-PCD019 permanently tests the infrastructure-related voltage. If there is still any current at the wall socket, the BS-PCD019 initiates a test sequence, establishes communication with the vehicle and ensures a safe recharging of the vehicle battery.
Comprehensive protection system
We designed all kinds of protective measures for BS-PCD019: Overcurrent protection, Overvoltage protection, Llightning protection, Electric leakage protection, and Short circuit protection. This is a deceive which can ensure the safety using for everyone.
Detecting faulty wiring
The intelligent BS-PCD019 also detects faulty wiring of the infrastructure-side socket and, in addition, controls the incoming protective conductor before charging begins.
Slender, practical and robust
Mode 2 charging cables never fail to convince with their appealing design. Thanks to the new enclosure format, the charging cable with integrated BS-PCD019 can be easily and compactly rolled up, since both bushes are fed out of the enclosure at an angle. Thus the charging cable requires less storage space.
The stable enclosure can be driven over by a car just like the charging connector and passes the test with a wheel load of 500kg. In practice the enclosure is exposed to more intensive environmental influences than plugs and connectors.
In day-to-day use, it is not out of the question for the enclosure to lie on the ground, covered in dirt, or even to be left in a puddle.
|Operating voltage||250V AC|
|Therminal temperature rise||<50K|
|Vibration resistance||Meet JDQ126.96.36.199-188.8.131.52 requirements|
|Mechanical life||no-load plug in/pull out >10000 times|
|Insertion and Extration Force||45N<F<80N|
|Shell material||Thermoplastic (Insulator inflammability UL94 V-0)|
|Contact Pin||Copper alloy, silver or nickel plating|
|Sealing gasket||rubber or silicon rubber|
Model: IEC 62196-2 Type 2
Rated current: 16A
Working voltage: 220-250V AC
Insulation resistance: > 1000M Ω
Terminal temperature rise: <50K
Withstand voltage: 2000V
Contact impedance: 0.5m Ω Max
Vibration resistance: Meet JDQ 53.3 requirements
Working temperature: -30°C ~+ 50°C
CE, TUV approved
Charging Cable Spec
TUV or UL 3*2.5mm2/6.0mm2+2*0.5mm2
Cord length: 3m, 5m or customized
Orange or Black
Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO)
Contact Pin: Copper alloy, silver or nickel plating
Sealing gasket: rubber or silicon rubber
Insert arrangements and functional defination
|3- (L3)||AC power|
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 3 to 25 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.